Home‎ > ‎Equipment‎ > ‎

Lathes

Daewoo Lynx 220L w/V65E Bar Feed

-Contains Fanuc Oi-T Control with 16C Collets
-Chuck size is 8” and bar capacity is 2 5/8” with a hole through spindle 
-The machine has a 12 station turret and runs at 4000 RPM / 15 HP
-Travel on the machine is Z 22" X 12"
   
Daewoo Lynx 200 (2 Machines)
-Contains Fanuc 21-T Series Control with 3J Collets
-Chuck size is 6” and bar capacity is 1 3/4” with a hole through spindle 
-The machine has a 12 station turret and runs at 4000 RPM / 10 HP
-Travel on the machine is Z 12" X 8"
               

   
Daewoo Puma 300L
-Contains Fanuc 21i TB Control with Programmable Tail Stock
-Chuck size is 12” and bar capacity is 4” with a hole through spindle 
-The machine has a 12 station turret and runs at 2800 RPM / 30 HP
-The machine travel is Z 50" X 15"

   
Doosan Lynx 220L w/V65E Bar Feed
-Contains Fanuc Oi-T Control with 16C Collets
-Chuck size is 8” and bar capacity is 2 5/8” with a hole through spindle 
-The machine has a 12 station turret and runs at 4000 RPM / 15 HP
-Travel on the machine is Z 22" X 12"
   
Doosan Lynx 220L
-Contains Fanuc Oi-T control with 16C Collets
-Chuck size is 8” and bar capacity is 2 5/8” with hole through spindle
-The machine has a 12 station turret and runs at 4000 RPM / 15 HP
-The travel on the machine is Z 22" X 12"
   
Doosan Lynx 220LSY
-Contains Fanuc Oi-T control with 16C Collets and Programmable Sub spindle / Tail Stock
-This machine contains live tooling with a 24 station turret
-Chuck size is 8” and bar capacity is 2 5/8” with hole through spindle 
-The machine has a 4 foot bar capacity and the machine runs at 4000 RPM / 15 HP
-The machine travel is Z 21" X 11"
 Doosan Puma 300 LC
-Contains Fanuc Oi-TD Control with Programmable Tail Stock
-Chuck is 12" and bar is 4" with hold through spindle
The machine has a 12 station turret and runs at 2800 RPM / 30 HP
-Travel on the machine is Z 50" X 15"